dmesg - Turris Omnia
Booting Linux on physical CPU 0x0
Linux version 4.4.0+ (jaroslav@jaroslav-Standard-PC-i440FX-PIIX-1996) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #1 SMP Thu May 10 09:37:58 CEST 2018
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=50c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Turris Omnia
Memory policy: Data cache writealloc
On node 0 totalpages: 524288
free_area_init_node: node 0, pgdat c05e5540, node_mem_map eedf9000
Normal zone: 1728 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 196608 pages, LIFO batch:31
HighMem zone: 327680 pages, LIFO batch:31
PERCPU: Embedded 12 pages/cpu @eedc8000 s18700 r8192 d22260 u49152
pcpu-alloc: s18700 r8192 d22260 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522560
Kernel command line: earlyprintk console=ttyS0,115200 rootfstype=btrfs rootdelay=2 root=b301 rootflags=subvol=@debian,commit=5 rw
log_buf_len individual max cpu contribution: 131072 bytes
log_buf_len total cpu_extra contributions: 131072 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 262144 bytes
early log buf free: 129576(98%)
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071076K/2097152K available (4045K kernel code, 184K rwdata, 1532K rodata, 244K init, 329K bss, 26076K reserved, 0K cma-reserved, 1310720K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
.text : 0xc0008000 - 0xc057a6e8 (5578 kB)
.init : 0xc057b000 - 0xc05b8000 ( 244 kB)
.data : 0xc05b8000 - 0xc05e6200 ( 185 kB)
.bss : 0xc05e9000 - 0xc063b6dc ( 330 kB)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 D prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
Switching to timer-based delay loop, resolution 40ns
sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8240 - 0x828c
mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
mvebu-pmsu: Initializing Power Management Service Unit
Booting CPU 1
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (100.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
xor: measuring software checksum speed
arm4regs : 2524.400 MB/sec
8regs : 1940.800 MB/sec
32regs : 2016.800 MB/sec
neon : 1838.000 MB/sec
xor: using function: arm4regs (2524.400 MB/sec)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
raid6: int32x1 gen() 210 MB/s
raid6: int32x1 xor() 265 MB/s
raid6: int32x2 gen() 347 MB/s
raid6: int32x2 xor() 312 MB/s
raid6: int32x4 gen() 436 MB/s
raid6: int32x4 xor() 338 MB/s
raid6: int32x8 gen() 427 MB/s
raid6: int32x8 xor() 319 MB/s
raid6: neonx1 gen() 1214 MB/s
raid6: neonx1 xor() 911 MB/s
raid6: neonx2 gen() 1305 MB/s
raid6: neonx2 xor() 1137 MB/s
raid6: neonx4 gen() 1143 MB/s
raid6: neonx4 xor() 1049 MB/s
raid6: neonx8 gen() 1070 MB/s
raid6: neonx8 xor() 904 MB/s
raid6: using algorithm neonx2 gen() 1305 MB/s
raid6: .... xor() 1137 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource armada_370_xp_clocksource
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
squashfs: version 4.0 (2009/01/31) Phillip Lougher
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
irq: Cannot allocate irq_descs @ IRQ48, assuming pre-allocated
irq: Cannot allocate irq_descs @ IRQ80, assuming pre-allocated
mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [168c:002e] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xe8000000-0xe800ffff 64bit]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot
PCI: bus1: Fast back to back transfers disabled
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
pci 0000:02:00.0: [168c:0046] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xea1fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
PCI: bus2: Fast back to back transfers disabled
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
pci 0000:03:00.0: [168c:0046] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xec000000-0xec1fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
PCI: bus3: Fast back to back transfers disabled
pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
pci 0000:00:02.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
pci 0000:00:03.0: BAR 14: assigned [mem 0xe0200000-0xe03fffff]
pci 0000:00:01.0: BAR 14: assigned [mem 0xe0400000-0xe04fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0xe0400000-0xe040ffff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xe01fffff]
pci 0000:03:00.0: BAR 0: assigned [mem 0xe0200000-0xe03fffff 64bit]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [mem 0xe0200000-0xe03fffff]
pcieport 0000:00:01.0: enabling device (0140 -> 0142)
pcieport 0000:00:02.0: enabling device (0140 -> 0142)
pcieport 0000:00:03.0: enabling device (0140 -> 0142)
mv_xor f1060800.xor: Marvell shared XOR driver
mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
mv_xor f1060900.xor: Marvell shared XOR driver
mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
console [ttyS0] disabled
console [ttyS0] enabled
ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host0: ahci-mvebu
scsi host1: ahci-mvebu
ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
m25p80 spi0.0: s25fl164k (8192 Kbytes)
2 ofpart partitions found on MTD device spi0.0
Creating 2 MTD partitions on "spi0.0":
0x000000000000-0x000000100000 : "U-Boot"
ftl_cs: FTL header not found.
0x000000100000-0x000000800000 : "Rescue system"
ftl_cs: FTL header not found.
libphy: Fixed MDIO Bus: probed
libphy: orion_mdio_bus: probed
mvneta f1030000.ethernet eth0: Using hardware mac address d8:58:d7:00:86:a6
mvneta f1034000.ethernet eth1: Using hardware mac address d8:58:d7:00:86:a7
mvneta f1070000.ethernet eth2: Using hardware mac address d8:58:d7:00:86:a8
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-orion: EHCI orion driver
orion-ehci f1058000.usb: EHCI Host Controller
orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
orion-ehci f1058000.usb: irq 39, io mem 0xf1058000
orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd f10f0000.usb3: xHCI Host Controller
xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci-hcd f10f0000.usb3: xHCI Host Controller
xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f10f8000.usb3: xHCI Host Controller
xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
xhci-hcd f10f8000.usb3: xHCI Host Controller
xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
i2c /dev entries driver
i2c i2c-0: Added multiplexed i2c bus 1
i2c i2c-0: Added multiplexed i2c bus 2
i2c i2c-0: Added multiplexed i2c bus 3
i2c i2c-0: Added multiplexed i2c bus 4
i2c i2c-0: Added multiplexed i2c bus 5
i2c i2c-0: Added multiplexed i2c bus 6
i2c i2c-0: Added multiplexed i2c bus 7
i2c i2c-0: Added multiplexed i2c bus 8
pca954x 0-0070: registered 8 multiplexed busses for I2C mux pca9547
orion_wdt: Initial timeout 171 sec
cpu: dev_pm_opp_of_cpumask_add_table: couldn't find opp table for cpu:0, -19
cpu cpu1: device_opp_debug_create_link: Failed to create link
cpu cpu1: _add_list_dev: Failed to register opp debugfs (-12)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
Loading compiled-in X.509 certificates
Btrfs loaded
mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mi:10
mvsw61xx 10.mvsw61xx: Using indirect addressing
mmc0: MAN_BKOPS_EN bit is not set
mmc0: new high speed MMC card at address 0001
mmcblk0: mmc0:0001 008G30 7.28 GiB
mmcblk0boot0: mmc0:0001 008G30 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 008G30 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 008G30 partition 3 4.00 MiB
mmcblk0: p1
armada38x-rtc f10a3800.rtc: setting system clock to 2018-05-10 17:44:33 UTC (1525974273)
Waiting 2 sec before mounting root device...
BTRFS: device fsid a56b51b4-5adb-4449-8e43-859d612d908b devid 1 transid 1551 /dev/root
BTRFS info (device mmcblk0p1): disk space caching is enabled
BTRFS: has skinny extents
BTRFS: detected SSD devices, enabling SSD mode
VFS: Mounted root (btrfs filesystem) on device 0:14.
Freeing unused kernel memory: 244K (c057b000 - c05b8000)
random: systemd urandom read with 5 bits of entropy available
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'arm'.
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Hardware watchdog 'Orion Watchdog', version 0
systemd[1]: Set hardware watchdog to 30s.
systemd-gpt-auto-generator[108]: Failed to determine block device of root file system: No such file or directory
systemd[100]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with error code 1.
systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Expecting device dev-ttyS0.device...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
BTRFS info (device mmcblk0p1): disk space caching is enabled
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Various fixups to make systemd work better on Debian...
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[143]: starting version 215
systemd-journald[142]: Received request to flush runtime journal from PID 1
at24 1-0054: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
input: gpio-keys as /devices/platform/gpio-keys/input/input0
marvell-cesa f1090000.crypto: CESA device successfully registered
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xf0b80000, irq=108
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
br0: port 2(eth2) entered forwarding state
br0: port 2(eth2) entered forwarding state
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
br0: port 1(eth0) entered disabled state
br0: port 2(eth2) entered disabled state
mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
br0: port 2(eth2) entered forwarding state
br0: port 2(eth2) entered forwarding state
mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
br0: port 1(eth0) entered forwarding state
br0: port 2(eth2) entered forwarding state
br0: port 2(eth2) entered disabled state
br0: port 1(eth0) entered disabled state
device eth0 left promiscuous mode
br0: port 1(eth0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
device eth2 left promiscuous mode
br0: port 2(eth2) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
br0: port 2(eth2) entered forwarding state
br0: port 2(eth2) entered forwarding state
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered disabled state
br0: port 2(eth2) entered disabled state
mvneta f1030000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
mvneta f1070000.ethernet eth2: Link is Up - 1Gbps/Full - flow control off
br0: port 2(eth2) entered forwarding state
br0: port 2(eth2) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
mvneta f1034000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
br0: port 1(eth0) entered forwarding state
br0: port 2(eth2) entered forwarding state
random: nonblocking pool is initialized